المشاكل التي يجب الانتباه إليها عند استخدام قاطعة الورق

Problems that should be paid attention to when using مقص ورق

In actual use, يجب أن تواجه آلة القطع مجموعة متنوعة من كائنات القطع, بالإضافة إلى الورق والكرتون, هناك الجلود, بلاستيك, أرضيات الفلين ولوحة PS. بسبب تنوع المواد التي سيتم قطعها, different pressures should be used for different materials, and the angle of the cutting edge should also be changed to ensure high quality cutting products.
Cutting edge angle
The choice of the angle of the cutting edge is a very important part of the cutting work. In other words, a good paper cutter must be equipped with a good paper cutting blade and sharpening process. لكن, we found in the after-sales service of the paper cutter that many paper cutter users often overlook this point. As a result, the method, method and angle of the cutting blade are often wrong, resulting in increased impact force during cutting. As a result, the safety screw is loosened or even broken, eventually causing mechanical damage.
There is a growing range of materials that need to be cut with a paper cutter, such as beer foil caps, carbonless copy paper, honeycomb paperboard, magnetic cards, photographic film, إلخ. These materials encounter different practical problems during the cutting process. For example, carbonless copy paper will have a indentation during cutting, and the magnetic card and photographic film may not be fixed in the cutting process, resulting in cutting out scraps. These problems can be solved by adjusting the pressure of the platen and improving the blade and cutting drive system.

مقص ورق